Refex 410A
INDENTIFICATION OF THE SUBSTANCE/PREPARATION AND THE COMPANY
Kanchipuram Dt,603 110.
Tamilnadu, India.COMPOSITION/INFORMATION ON INGREDIENTS
Pentafluoroethane (R125)HAZARDS INDENTIFICATION
Liquefied gas.FIRST AID MEASURES
In high concentrations may cause asphyxiation.
Symptoms may include loss of mobility/consciousness.Victim may not be aware of asphyxiation. Remove victim to uncontaminated area wearing self contained breating apparatus. Keep victim warmand rested. Call a doctor.
Apply artificial respiration if breathing stopped
Obtain medical assistance.FIRE FIGHTING MEASURES
Non flammable.
Carbonyl fluoride
Carbon monoxide
Hydrogen fluoride
Move away from the container and cool with water from a protected position.ACCIDENTAL RELEASE MEASURES
Wear self – contained breathing apparatus when entering area unless atmosphere is proved to be safe.
Ensure adequate ventilation.
prevent from entering sewers, basements and workpits, or any place where its accumulation can be
Dangerous.HANDLING AND STORAGE
Do not allow backfeed into the cantainer.
Use only properly specified equipment which is suitable for this product, its supply pressure and
Temperature. Contact your gas supplier if in doubt.
Refer to supplier’s container handling instructions.
Keep container below 50*C in a well ventilated place.EXPOSURE CONTROLS/PERSONAL PROTECTION
Do not smoke while handing product.
Ensure adequate ventilation.PHYSICAL AND CHEMICAL PROPERTIES
Poor warning properties at low concentrations.STABILITY AND REACTIVITY
Thermal decomposition yields toxic products which acan be corrosive in the presence of moisture.TOXICOLOGICAL INFORMATION
ECOLOGICAL INFORMATION
Pentafluoroethane (125)-When discharged in large quantites may contribute to the greehose effect.DISPOSAL CONSIDEERATIONS
Do not discharge into any place where its accumulation could be dangerous.
Refer to supplier’s waste gas recovery programme.
Contact supplier if guidance is required.TRASPORT INFORMATION
Ensure vehicle driver is aware of the potgential hazards of the load and knows what to do in the
event of and accident or an emergency.
Before transportijng product containers ensure that they are finnly secured and:
- Cylinder valve is closed and not leaking .
- Valve outlet cap nut or plug (where provided) is correctly fitted.
- Valve protection device (where provided) is correctly fitted.
- there is adequate ventilation.- Compliance with applicable regulations.REGULATORY INFORMATION
- Symbols
OTHER INFORMATION
Contact with liquid may cause cold burns/frost bite.
Asphyxiant in high concentrations.
Keep container in well ventilated place.
Do not brethe the gas.
The hazard of asphyxiation is often overlooked and must be streessred during operator training.
Users of Breathing apparatus must be trained.
